To set up VPN with the WireGuard client on macOS devices you will need a WireGuard app and a configuration file:
1. Install the WireGuard app from the AppStore.
2. Get the .conf configuration file from the your BlancVPN personal account:
- Choose the location, then «Other protocols» → «WireGuard». Save the .conf file. After you have downloaded the first .conf file, the file on the website will be automatically replaced by the next one, which you may download on your other device (Blanc_LT_VNO1 → Blanc_LT_VNO2, and so on).
3. Open the WireGuard app and click on «+» in the bottom left corner. The file dialog will appear. Choose «Import tunnel(s) from file».
4. Find the previously downloaded .conf file and click on «Import».
5. The operating system will ask to allow adding a VPN connection. The file dialog will appear. Choose «Allow».
6. The WireGuard file dialog will appear again. To connect to a VPN tunnel, click on «Activate».
Well done! You are now connected to the fast VPN.
You may request VPN configurations for other regions and add them to WireGuard, following the same guidelines. This will allow you to change regions, if necessary.
Please note that you can’t use one configuration file on two devices in the same location. For example, if you have downloaded the file «WGSE…._5.conf» on your device, please use the file «WGSE…_4.conf» for another device in the same location and so on. The same file may be used only in another location.
Setting up KillSwitch for WireGuard - to make connection persistent
VPN connection may be lost when you switch between Wi-Fi networks or turn sleep mode on. To avoid this, set up KillSwitch for WireGuard. This will allow your VPN to reconnect automatically.
To set up KillSwitch:
1. Open the WireGuard app and choose the region (configuration), where you need the automatic connection. Click on «Edit» in the bottom right corner.
2. Enter your Mac password.
3. In the «Auto Connection» section tick Ethernet and Wi-Fi, then choose «Any SSID» in the drop-down menu. Click on «Save» in the bottom right corner.
Well done! Now your VPN will be automatically connected when you wake up your Mac or switch between Wi-Fi networks.
If you need to access a local network or a web configurator of your router, tick «Exclude private IP addresses».
If you face any difficulty, please contact our support service. We are always here to help you!
Make sure BlancVPN is working
After setting up BlancVPN on your device, check if it's working correctly